Helical Thread Insert Tools
Raptor Supplies offers a complete line of thread insert tools from Chrislynn, Helicoil, Recoil and ...Read more
Style | Model | Thread Size | Type | Thread Type | Material | Price | |
---|---|---|---|---|---|---|---|
A | 7551-01 | €262.55 | RFQ | ||||
A | 7551-8 (M) | €282.84 | RFQ | ||||
A | 7551-4 (M) | - | RFQ | ||||
A | 7551-6 (M) | €282.84 | RFQ | ||||
A | 7551-04 | €252.00 | |||||
A | 7551-05 | €223.83 | |||||
A | 7551-5 (M) | €282.84 | RFQ | ||||
A | 7551-06 | €237.90 | |||||
A | 7551-7 (M) | €300.63 | RFQ | ||||
A | 7551-2 | €258.14 | |||||
A | 7551-3 (M) | €231.88 | RFQ | ||||
A | 7551-1 (M) | €226.13 | RFQ |
Precision Hand Installation Tools
Threaded Mandrels, UNC
Non-Captive Prewinders, UNF
Style | Model | Thread Size | Type | Thread Type | |
---|---|---|---|---|---|
A | 7552-8 (M) | €347.69 | RFQ | ||
A | 7552-4 (M) | €213.95 | RFQ | ||
A | 7552-03 | €204.42 | |||
A | 7552-6 (M) | €300.63 | RFQ | ||
A | 7552-04 | €244.18 | |||
A | 7552-5 (M) | €282.84 | RFQ | ||
A | 7552-06 | €204.42 | |||
A | 7552-7 (M) | €320.21 | RFQ | ||
A | 7552-2 | €223.83 | |||
A | 7552-3 (M) | €232.98 | RFQ |
Helical Thread Insert Tools
Raptor Supplies offers a complete line of thread insert tools from Chrislynn, Helicoil, Recoil and Grainger. We also offer a wide range of insert installation tools, STI plug taps, tang breaking tools and bushings for installing threaded inserts into a pre-drilled hole. Steel power drivers in different hex shank sizes are also available for installing self-locking or knife thread inserts.
Frequently Asked Questions
How to install helical inserts?
- Drill a hole using the suggested drill bit size.
- Tap the hole, then screw the insert into the installation tool. The prong must be properly engaged in the driving contour of the tool.
- Using the installation tool, thread the insert into the hole. Install the insert a quarter to half turn below the hole's surface.
- If your insert has a prong, remove it with a punch or break-off tool. Remove the prong to allow your screw to fully enter the insert.
Why break the tang on a Helicoil?
If the tang is not properly removed, the hole might get compromised and the male fastener will not be able to pass through. Browse through our catalogue to find the right tang break-off tool for your needs.
What is the use of a mandrel?
A mandrel is a piece of metal that is used to support a partially machined workpiece while it is being finished, or as a core around which parts can be bent / forged / moulded.
Explore More
- Indoor Fixtures
- Indoor Air Quality
- Paint Sprayers and Accessories
- Counters and Hour Meters
- Light Bulb Related Products
- Paint Markers
- Filter Regulator Lubricators (FRL)
- Refrigerant Recovery Cylinders
- Fall Arrest Posts and Extensions
- Conveyor Accessories
- PARKER Adapter, Stainless Steel
- HONEYWELL Linear Pneumatic Actuators
- SCHNEIDER ELECTRIC Auxiliary Contacts
- QMARK Electric Unit Heater Steel
- BUSSMANN Low Voltage Fuses
- EXTECH Process Calibrator
- MASTER MAGNETICS Magnetic Pickup Tools
- KERN AND SOHN OZB-AE Series Eyepieces
- WINSMITH SE Enclosure Series, E26 Size, XDBS Single Reduction Speed Reducers
- BUSSMANN Knifeblade Fuse Block, Class J, 450-600V Range