PROTO Puller/Separator Sets
Puller / separator sets are used in automotive and industrial applications for removing parts that are tightly fitted onto other parts, such as gears, bearings and pulleys. Raptor Supplies
...Read morePROTO -
Pullers
PROTO -
2/3-way Cone Puller Set
Model | Item | Price (ex. VAT) | |
---|---|---|---|
J4252 | AD2LBY | €320.60 |
PROTO -
Standard Puller Set
Model | Item | Price (ex. VAT) | |
---|---|---|---|
J4290B | AD2LCF | €1,094.31 |
PROTO -
Wide Puller Set, 3/4 X 10-1/4 Inch Screw Size
Model | Item | Price (ex. VAT) | |
---|---|---|---|
J4292B | AD2LCH | €1,695.88 |
PROTO -
Set Puller Combo
Model | Item | Price (ex. VAT) | |
---|---|---|---|
J5041 | AB3NQA | €1,060.71 |
PROTO -
Press-N-Pull Set, 10 Ton Capacity - 41 Pc
Model | Item | Price (ex. VAT) | |
---|---|---|---|
J4293B | AD2LCJ | €1,770.44 |
PROTO -
Gen Purpose Puller Set 3/6/10 Ton
Model | Item | Price (ex. VAT) | |
---|---|---|---|
J4245 | AD2LBW | €2,609.88 |
Features
- Proto puller sets or separator sets feature 2 or 3 jaw configured pullers to distribute the applied force evenly.
- They include detachable tips and crossarms for efficient gripping & functioning of the pullers.
- Selected models have steel / moulded plastic / blow moulded construction for the safety of tools.
- Some Proto puller sets comprise all other tools such as bearing separators, adaptors, forcing nuts, coupling nuts, forcing screws, lock screws, thrust washers, spring clips, cap screws and long narrow jaws.
- They are capable of handling force up to 10 tons.
Working Mechanism
- These pullers or separators work by rotating a crossbar that will move the force screw or the centre bolt towards the shaft.
- The puller legs are placed around the part.
- The puller screw is tightened against the shaft to apply maximum pressure for removing the part from the shaft.
Standards and Approvals
- ISO 9001: 2015
Frequently Asked Questions
How do you measure a bearing puller?
Bearing pullers are measured according to their reach. The puller's reach is the available distance between the head of the legs and the pulling surface of the legs. When these legs are opened, the distance between them decreases or increases.
What are the types of pullers?
- 2 and 3 arm bearing pullers
- Internal bearing pullers
- Bar type pullers
- Slide hammer pullers
Explore More
- Brooms Brushes and Dust Pans
- Fall Protection
- Abrasive Accessories
- Electrical Boxes
- Specialty Fans and Accessories
- Scratch Brushes
- Manual Material Lift Accessories
- Water Circulator Motors
- Jumper Cables
- Recycled Trash Bags and Liners
- RAE Airport Pavement Stencil, 3
- SALSBURY INDUSTRIES Mailbox Post, Bronze
- DAYTON Adjustable Speed Controls, Rotary, 120V
- GRUVLOK Grooved End Elbows, Galvanized
- MARATHON MOTORS Fan and Blower Motors, Direct Drive, PSC, Open Air Over, Belly Band Thru-Bolt, Double Shaft
- EATON 70 Series Photoelectric Sensor Control Modules
- ALL GEAR Blue Craze II Arborist Climbing Lines
- GATES Application Specific Timing Belts
- SIEMENS Non Illuminated Selector Switch Operators
- SPEEDAIRE Refrigerated Dryer Maintenance Kits