Motion Control Couplings
OCT Series Coupling Oldham Clamp
Ruland Manufacturing OCT Series coupling oldham clamps are three-piece flexible shaft couplings employed to connect shafts in mechanical power transmission assemblies. They comprise two anodised aluminium hubs which press fit onto a centre disk. These couplings can operate under low bearing loads when securing sensitive system components and feature a balanced design for reduced vibration. They are available in 0.750, 1.000, 1.313, 1.625 and 2.250 inch clearance diameters.
Ruland Manufacturing OCT Series coupling oldham clamps are three-piece flexible shaft couplings employed to connect shafts in mechanical power transmission assemblies. They comprise two anodised aluminium hubs which press fit onto a centre disk. These couplings can operate under low bearing loads when securing sensitive system components and feature a balanced design for reduced vibration. They are available in 0.750, 1.000, 1.313, 1.625 and 2.250 inch clearance diameters.
Style | Model | Max. Parallel Misalignment (In.) | Overall Length | Bore Dia. | Outside Dia. | Clearance Dia. | Screw Size | Hub Dia. | Length through Bore | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | OCT16-8-A | €42.87 | |||||||||
A | OCT12-3-A | €31.37 | |||||||||
A | OCT12-4-A | €31.37 | |||||||||
A | OCT16-6-A | €42.87 | |||||||||
A | OCT16-4-A | €42.87 | |||||||||
A | OCT21-6-A | €63.22 | |||||||||
A | OCT16-5-A | €42.87 | |||||||||
A | OCT21-10-A | €63.22 | |||||||||
A | OCT12-5-A | €31.37 | |||||||||
A | OCT21-8-A | €63.22 | |||||||||
A | OCT21-5-A | €63.22 | |||||||||
A | OCT26-8-A | €72.82 | |||||||||
A | OCT26-12-A | €72.82 | |||||||||
A | OCT36-12-A | €142.50 | |||||||||
A | OCT36-8-A | €142.50 | |||||||||
A | OCT26-6-A | €72.82 | |||||||||
A | OCT36-16-A | €142.50 | |||||||||
A | OCT36-10-A | €142.50 | |||||||||
A | OCT36-14-A | €142.50 | |||||||||
A | OCT26-10-A | €72.82 |
4 Beam Motion Control Couplings
Ruland Manufacturing single-piece motion control couplings are installed on 2 shafts moving at the same speed & in the same direction, for preventing misalignment (up to 3 degrees) between the shafts. The balanced one-piece design has 4 beams in the centre for high torque capacity, low windup and increased stiffness. Cap screws firmly fit over the shafts, without causing marring on the surface. These couplings are tested beyond DIN 912 12.9 standards for maximum torque capability. Choose from a wide range of motion control couplings, available in aluminium and stainless steel variants on Raptor Supplies.
Ruland Manufacturing single-piece motion control couplings are installed on 2 shafts moving at the same speed & in the same direction, for preventing misalignment (up to 3 degrees) between the shafts. The balanced one-piece design has 4 beams in the centre for high torque capacity, low windup and increased stiffness. Cap screws firmly fit over the shafts, without causing marring on the surface. These couplings are tested beyond DIN 912 12.9 standards for maximum torque capability. Choose from a wide range of motion control couplings, available in aluminium and stainless steel variants on Raptor Supplies.
Style | Model | Screw Size | Max. Parallel Misalignment (In.) | Bore Dia. | Hub Dia. | Length through Bore | Material | Max. Axial Misalignment (In.) | Max. Bore | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | PCMR10-3-3-SS | €210.12 | |||||||||
B | PCR6-1.5-1.5-SS | €210.12 | |||||||||
A | PCMR10-3-3-A | €91.25 | |||||||||
B | PCR6-1.5-1.5-A | €92.28 | |||||||||
B | PCR8-1.5-1.5-A | €82.56 | |||||||||
A | PCMR16-5-3-SS | €217.72 | |||||||||
C | PCR8-2-1.5-A | €82.56 | |||||||||
C | PCMR16-4-4-A | €79.51 | |||||||||
A | PCMR16-5-4-SS | €217.72 | |||||||||
B | PCR8-1.5-1.5-SS | €214.11 | |||||||||
A | PCMR16-4-4-SS | €217.72 | |||||||||
C | PCR8-2-2-A | €82.56 | |||||||||
A | PCMR16-3-3-SS | €217.72 | |||||||||
D | PSR8-2-1.5-A | €69.22 | |||||||||
A | PCMR13-3-3-SS | €214.11 | |||||||||
C | PCMR16-3-3-A | €79.51 | |||||||||
C | PCR10-3-2-A | €79.51 | |||||||||
C | PCR10-3-2.5-A | €79.51 | |||||||||
D | PSR8-2-2-A | €69.22 | |||||||||
A | PCMR16-5-5-SS | €217.72 | |||||||||
E | PCR10-3-3-SS | €217.72 | |||||||||
E | PCR10-2.5-2-A | €79.51 | |||||||||
B | PCR8-2-1.5-SS | €214.11 | |||||||||
C | PCMR13-3-3-A | €82.56 | |||||||||
E | PCR10-2-2-SS | €217.72 |
P Series 4 Beam Couplings
Ruland Manufacturing P Series 4 beam couplings are used for running robots, computers, metering devices and medical equipment. These couplings provide zero backlash and feature a balanced design for minimising vibrations in devices working at a maximum speed of 6000 rpm. They are made from aluminium / stainless steel for corrosion resistance and fix angular misalignment up to 3 degrees. These motion control couplings deliver torques ranging between 5.5 & 92 inch-lb and can withstand temperatures up to 350 degrees F. Variants are available in outside diameters ranging from 0.75 to 31.8 inches.
Ruland Manufacturing P Series 4 beam couplings are used for running robots, computers, metering devices and medical equipment. These couplings provide zero backlash and feature a balanced design for minimising vibrations in devices working at a maximum speed of 6000 rpm. They are made from aluminium / stainless steel for corrosion resistance and fix angular misalignment up to 3 degrees. These motion control couplings deliver torques ranging between 5.5 & 92 inch-lb and can withstand temperatures up to 350 degrees F. Variants are available in outside diameters ranging from 0.75 to 31.8 inches.
Style | Model | Size | Max. Temp. Range (F) | Bore Dia. | Length through Bore | Material | Max. Axial Misalignment (In.) | Max. Bore | Max. Parallel Misalignment (In.) | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | PSMR10-3-3-A | €68.17 | |||||||||
A | PSMR25-8-8-A | €83.11 | |||||||||
A | PSMR25-8-6-A | €83.11 | |||||||||
A | PSMR29-12-8-A | €100.84 | |||||||||
A | PSMR29-10-10-A | €100.84 | |||||||||
A | PSMR16-5-4-A | €66.78 | |||||||||
A | PSMR29-12-6-A | €100.84 | |||||||||
A | PSMR13-4-4-A | €68.81 | |||||||||
A | PSMR29-8-6-A | €100.84 | |||||||||
A | PSMR19-6-6-A | €69.90 | |||||||||
A | PSMR19-4-4-A | €69.90 | |||||||||
A | PSMR19-5-3-A | €69.90 | |||||||||
A | PSMR16-5-5-A | €66.78 | |||||||||
A | PSMR13-5-4-A | €59.12 | |||||||||
A | PSMR16-4-4-A | €66.78 | |||||||||
A | PSMR19-6-3-A | €69.90 | |||||||||
A | PSMR25-10-8-A | €83.11 | |||||||||
A | PSMR29-10-8-A | €100.84 | |||||||||
A | PSMR19-6-5-A | €69.90 | |||||||||
A | PSMR25-10-10-A | €83.11 | |||||||||
A | PSMR16-4-3-A | €66.78 | |||||||||
A | PSMR19-5-5-A | €69.90 | |||||||||
A | PSMR25-10-6-A | €80.30 | |||||||||
A | PSMR29-10-6-A | €100.84 | |||||||||
A | PSMR29-8-8-A | €100.84 |
EC Series Single Beam Clamp Style Coupling
Lovejoy EC Series single beam clamp style couplings protect shaft support bearings against destructive thrust and radial load due to axial motion and misalignment respectively. These motion control couplings feature a zero-backlash design to deliver angular misalignment up to 7 degrees and are coated with an anodized aluminium finish ensuring chemical stability and heat resistance. They provide easy installation while offering torsional stiffness up to 409 in-lbs/rad. Choose from a wide range of these single beam clamp style couplings, available in 19, 23, 32 and 38 inches length variants on Raptor Supplies.
Lovejoy EC Series single beam clamp style couplings protect shaft support bearings against destructive thrust and radial load due to axial motion and misalignment respectively. These motion control couplings feature a zero-backlash design to deliver angular misalignment up to 7 degrees and are coated with an anodized aluminium finish ensuring chemical stability and heat resistance. They provide easy installation while offering torsional stiffness up to 409 in-lbs/rad. Choose from a wide range of these single beam clamp style couplings, available in 19, 23, 32 and 38 inches length variants on Raptor Supplies.
Style | Model | Overall Length | Length through Bore | Bore A | Bore Dia. | Coupling Size | Coupling Type | Hub Dia. | Hub Material | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 68514456618 | €84.21 | RFQ | ||||||||
B | EC075 1/4x1/4 | €186.94 | |||||||||
C | 68514456630 | €118.94 | RFQ | ||||||||
C | 68514456640 | €140.13 | RFQ |
Four Beam Couplings, Set Screw, MW Series
Ruland Manufacturing MW Series four beam couplings feature two sets of two spiral cuts to offer high torque capacity & low windup. These spiral couplings have a balanced design for reduced vibration at high speed. They come with small bearings for low radial forces and efficient performance. These set screw style couplings feature a compact design that fits into confined spaces and allows easy retrofits in existing equipment. They are manufactured from 7075 aluminium for light weight & low inertia, and 303 stainless steel for increased torque capability.
Ruland Manufacturing MW Series four beam couplings feature two sets of two spiral cuts to offer high torque capacity & low windup. These spiral couplings have a balanced design for reduced vibration at high speed. They come with small bearings for low radial forces and efficient performance. These set screw style couplings feature a compact design that fits into confined spaces and allows easy retrofits in existing equipment. They are manufactured from 7075 aluminium for light weight & low inertia, and 303 stainless steel for increased torque capability.
Style | Model | Size | Max. Temp. Range (F) | Bore Dia. | Length through Bore | Material | Max. Axial Misalignment (In.) | Max. Bore | Max. Parallel Misalignment (In.) | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | MWS15-3-3-SS | €173.16 | |||||||||
A | MWS15-5-5-SS | €173.16 | |||||||||
A | MWS15-5-4-A | €69.09 | |||||||||
A | MWS15-5-3-A | €69.09 | |||||||||
A | MWS15-4-3-A | €69.09 | |||||||||
A | MWS15-3-3-A | €69.09 | |||||||||
A | MWS15-4-3-SS | €173.16 | |||||||||
A | MWS15-5-5-A | €69.09 | |||||||||
A | MWS15-5-3-SS | €173.16 | |||||||||
A | MWS15-5-4-SS | €173.16 | |||||||||
A | MWS15-4-4-SS | €173.16 | |||||||||
A | MWS15-4-4-A | €69.09 | |||||||||
A | MWS20-6-5-SS | €191.55 | |||||||||
A | MWS20-6-5-A | €76.22 | |||||||||
A | MWS20-6-4-SS | €191.55 | |||||||||
A | MWS20-6-6-A | €76.22 | |||||||||
A | MWS20-5-5-SS | €191.55 | |||||||||
A | MWS20-5-5-A | €76.22 | |||||||||
A | MWS20-5-4-SS | €191.55 | |||||||||
A | MWS20-6-6-SS | €191.55 | |||||||||
A | MWS20-4-4-SS | €191.55 | |||||||||
A | MWS20-6-4-A | €76.22 | |||||||||
A | MWS20-5-4-A | €76.22 | |||||||||
A | MWS20-4-4-A | €76.22 | |||||||||
A | MWS25-10-10-A | €88.41 |
MOCT Series, Coupling Oldham Clamp
Ruland Manufacturing MOCT Series coupling oldham clamps are ideal for connecting shafts with misalignment while transmitting torque. They maintain precise alignment between two shafts while allowing axial movement to prevent angular, parallel and axial misalignment, protecting sensitive components and reducing wear. These clamps are used in automation, machinery and motion control systems. They have aluminium construction for a high strength-to-weight ratio and structural rigidity. These clamps feature anodised aluminium finish for protection against corrosion and wear while providing a smooth and visually pleasing surface. They have a maximum operating speed of 4500 RPM to effectively handle dynamic loads and maintain the integrity of the coupled components. These clamps also exhibit remarkable heat resistance up to 225 degrees F.
Ruland Manufacturing MOCT Series coupling oldham clamps are ideal for connecting shafts with misalignment while transmitting torque. They maintain precise alignment between two shafts while allowing axial movement to prevent angular, parallel and axial misalignment, protecting sensitive components and reducing wear. These clamps are used in automation, machinery and motion control systems. They have aluminium construction for a high strength-to-weight ratio and structural rigidity. These clamps feature anodised aluminium finish for protection against corrosion and wear while providing a smooth and visually pleasing surface. They have a maximum operating speed of 4500 RPM to effectively handle dynamic loads and maintain the integrity of the coupled components. These clamps also exhibit remarkable heat resistance up to 225 degrees F.
Style | Model | Max. Parallel Misalignment (In.) | Overall Length | Bore Dia. | Outside Dia. | Clearance Dia. | Screw Size | Hub Dia. | Length through Bore | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | MOCT19-8-A | €31.37 | |||||||||
A | MOCT19-6-A | €31.37 | |||||||||
A | MOCT33-8-A | €63.22 | |||||||||
A | MOCT33-16-A | €65.23 | |||||||||
A | MOCT25-6-A | €43.55 | |||||||||
A | MOCT25-10-A | €40.37 | |||||||||
A | MOCT33-10-A | €63.22 | |||||||||
A | MOCT25-12-A | €42.87 | |||||||||
A | MOCT25-8-A | €42.87 | |||||||||
A | MOCT19-5-A | €31.37 | |||||||||
A | MOCT19-4-A | €31.37 | |||||||||
A | MOCT33-14-A | €63.22 | |||||||||
A | MOCT33-12-A | €63.22 | |||||||||
A | MOCT57-30-A | €143.34 | |||||||||
A | MOCT57-16-A | €143.34 | |||||||||
A | MOCT41-12-A | €73.61 | |||||||||
A | MOCT41-14-A | €73.61 | |||||||||
A | MOCT41-16-A | €73.61 | |||||||||
A | MOCT41-20-A | €73.61 | |||||||||
A | MOCT41-10-A | €73.61 | |||||||||
A | MOCT57-14-A | €143.34 | |||||||||
A | MOCT57-20-A | €143.34 | |||||||||
A | MOCT57-25-A | €143.34 |
Bellows Clamp Style Couplings
Lovejoy bellows clamp style couplings are suitable for accommodating axial, parallel & angular misalignment while providing high torsional stiffness between shafts & electric motors. These couplings feature aluminium hubs with stainless steel bellows for low reactionary loading and selected models have compact design for low inertia. Choose from a broad range of these coupling bellows, available in 12700 & 15000 rpm options on Raptor Supplies.
Lovejoy bellows clamp style couplings are suitable for accommodating axial, parallel & angular misalignment while providing high torsional stiffness between shafts & electric motors. These couplings feature aluminium hubs with stainless steel bellows for low reactionary loading and selected models have compact design for low inertia. Choose from a broad range of these coupling bellows, available in 12700 & 15000 rpm options on Raptor Supplies.
Style | Model | Min. Bore | Max. Axial Misalignment (In.) | Axial Misalignment | Bore B | Coupling Size | Coupling Type | Length through Bore | Max. Angular Misalignment | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | BWC41 5/8x5/8 | €106.18 | |||||||||
A | BWC41 1/2x3/8 | €505.88 | |||||||||
A | BWC41 1/2x1/2 | €253.01 | |||||||||
B | BWLC63 5/8x3/4 | €192.94 | |||||||||
B | BWLC63 3/4x1 | €192.94 |
MDS Series, Mini Disc Spacer Clamp Style Couplings Inch Bores
Style | Model | |
---|---|---|
A | 68514477179 | RFQ |
B | 68514477161 | RFQ |
B | 68514477182 | RFQ |
B | 68514477178 | RFQ |
B | 68514477176 | RFQ |
B | 68514477177 | RFQ |
B | 68514477174 | RFQ |
B | 68514477166 | RFQ |
B | 68514477168 | RFQ |
B | 68514477164 | RFQ |
B | 68514477163 | RFQ |
B | 68514477162 | RFQ |
B | 68514477181 | RFQ |
B | 68514477183 | RFQ |
B | 68514477184 | RFQ |
B | 68514477175 | RFQ |
B | 68514477173 | RFQ |
B | 68514477172 | RFQ |
B | 68514477167 | RFQ |
B | 68514477165 | RFQ |
B | 68514477169 | RFQ |
B | 68514477180 | RFQ |
Style | Model | Overall Length | Max. Bore | Bore A | Bore Size | Clamp Screw Size | Coupling Size | Dimension HD | Length through Bore | |
---|---|---|---|---|---|---|---|---|---|---|
A | 68514477186 | RFQ | ||||||||
A | 68514477188 | RFQ | ||||||||
A | 68514477187 | RFQ | ||||||||
A | 68514477193 | RFQ | ||||||||
A | 68514477191 | RFQ | ||||||||
A | 68514477190 | RFQ | ||||||||
A | 68514477189 | RFQ | ||||||||
A | 68514477192 | RFQ | ||||||||
A | 68514477194 | RFQ | ||||||||
A | 68514477197 | RFQ | ||||||||
A | 68514477199 | RFQ | ||||||||
A | 68514477202 | RFQ | ||||||||
A | 68514477200 | RFQ | ||||||||
A | 68514477198 | RFQ | ||||||||
A | 68514477196 | RFQ | ||||||||
A | 68514477195 | RFQ | ||||||||
A | 68514477201 | RFQ | ||||||||
A | 68514477203 | RFQ | ||||||||
A | 68514477207 | RFQ | ||||||||
A | 68514477208 | RFQ | ||||||||
A | 68514477206 | RFQ | ||||||||
A | 68514477205 | RFQ | ||||||||
A | 68514477204 | RFQ | ||||||||
A | 68514477209 | RFQ |
ASB Series, Aluminum Single Beam Clamp Style Couplings, Inch Bores
Style | Model | Torsional Stiffness | Min. Bore | Bore A | Bore Size | Clamp Screw Size | Coupling Size | Length through Bore | Max. Bore | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 68514477053 | €170.37 | RFQ | ||||||||
B | 68514477042 | - | RFQ | ||||||||
B | 68514477041 | - | RFQ | ||||||||
B | 68514477047 | - | RFQ | ||||||||
B | 68514477048 | - | RFQ | ||||||||
B | 68514477044 | - | RFQ | ||||||||
B | 68514477045 | - | RFQ | ||||||||
B | 68514477050 | - | RFQ | ||||||||
B | 68514477051 | - | RFQ | ||||||||
B | 68514477054 | - | RFQ |
BWC Series, Bellows Clamp Style Couplings Metric Bores
Style | Model | Min. Bore | Item | Bore A | Bore B | Bore Size | Clamp Screw Size | Coupling Size | Coupling Type | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 68514476994 | €162.37 | RFQ | ||||||||
B | 68514476990 | - | RFQ | ||||||||
B | 68514476991 | - | RFQ | ||||||||
B | 68514476993 | - | RFQ | ||||||||
B | 68514476995 | - | RFQ | ||||||||
B | 68514476996 | - | RFQ | ||||||||
B | 68514476999 | - | RFQ | ||||||||
A | 68514477000 | €218.27 | RFQ | ||||||||
B | 68514477004 | - | RFQ | ||||||||
B | 68514477005 | - | RFQ |
ADB Series, Aluminum Double Beam Clamp Style Couplings Inch Bores
Style | Model | Min. Bore | Hub Material | Bore A | Bore Size | Clamp Screw Size | Coupling Size | Coupling Type | Finish | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 68514476847 | €291.20 | RFQ | ||||||||
A | 68514476839 | €225.40 | RFQ | ||||||||
A | 68514476842 | €236.74 | RFQ | ||||||||
B | 68514476849 | €321.72 | |||||||||
C | 68514476858 | €307.02 | RFQ | ||||||||
D | 68514476831 | €132.48 | |||||||||
D | 68514476832 | €132.48 | |||||||||
D | 68514476833 | €169.54 | |||||||||
D | 68514476830 | €132.48 | |||||||||
D | 68514476837 | €169.54 | |||||||||
D | 68514476835 | €169.54 | |||||||||
D | 68514476834 | €169.54 | |||||||||
D | 68514476836 | €169.54 | |||||||||
D | 68514476841 | €225.40 | |||||||||
D | 68514476838 | €225.40 | |||||||||
D | 68514476840 | €225.40 | |||||||||
D | 68514476843 | €236.74 | |||||||||
D | 68514476844 | €236.74 | |||||||||
D | 68514476854 | €307.02 | |||||||||
D | 68514476846 | €291.20 | |||||||||
D | 68514476848 | €321.30 | |||||||||
D | 68514476853 | €323.68 | |||||||||
D | 68514476845 | €291.20 | |||||||||
D | 68514476856 | €307.02 | |||||||||
D | 68514476851 | €307.16 |
MOL Series, Oldham Clamp Style Coupling Hubs Inch Bores
Style | Model | Parallel Misalignment | Min. Bore | Bore Size | Coupling Size | Coupling Type | Length through Bore | Max. Bore | Max. Speed | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 68514458618 | €78.94 | RFQ | ||||||||
B | 68514458610 | - | RFQ | ||||||||
A | 68514458121 | €98.70 | RFQ | ||||||||
A | 68514458119 | €98.70 | RFQ | ||||||||
B | 68514458095 | - | RFQ | ||||||||
B | 68514458107 | - | RFQ | ||||||||
C | MOL25C Hub 3/16 | €49.85 | |||||||||
D | 68514458120 | - | RFQ | ||||||||
D | 68514458083 | - | RFQ | ||||||||
D | 68514458603 | - | RFQ | ||||||||
D | 68514458096 | - | RFQ | ||||||||
D | 68514458609 | - | RFQ | ||||||||
D | 68514458615 | - | RFQ | ||||||||
D | 68514458617 | - | RFQ |
MD Series, Mini Disc Clamp Style Couplings Inch Bores
Style | Model | Overall Length | Max. Speed | Bore A | Bore Size | Clamp Screw Size | Coupling Size | Length through Bore | Max. Bore | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 68514477216 | €279.51 | RFQ | ||||||||
B | 68514477210 | - | RFQ | ||||||||
B | 68514477211 | - | RFQ | ||||||||
B | 68514477212 | - | RFQ | ||||||||
B | 68514477213 | - | RFQ | ||||||||
B | 68514477214 | - | RFQ | ||||||||
B | 68514477215 | - | RFQ | ||||||||
B | 68514477217 | - | RFQ | ||||||||
B | 68514477218 | - | RFQ | ||||||||
B | 68514477221 | - | RFQ | ||||||||
B | 68514477220 | - | RFQ | ||||||||
B | 68514477219 | - | RFQ | ||||||||
B | 68514477222 | - | RFQ | ||||||||
B | 68514477225 | - | RFQ | ||||||||
B | 68514477223 | - | RFQ | ||||||||
B | 68514477228 | - | RFQ | ||||||||
B | 68514477226 | - | RFQ | ||||||||
B | 68514477224 | - | RFQ | ||||||||
B | 68514477227 | - | RFQ | ||||||||
B | 68514477230 | - | RFQ | ||||||||
B | 68514477232 | - | RFQ | ||||||||
B | 68514477233 | - | RFQ | ||||||||
B | 68514477237 | - | RFQ | ||||||||
B | 68514477234 | - | RFQ | ||||||||
B | 68514477229 | - | RFQ |
Style | Model | Coupling Size | Nominal Torque | Bore Size | Length through Bore | Max. Bore | Min. Bore | Moment of Inertia | Clamp Screw Size | |
---|---|---|---|---|---|---|---|---|---|---|
A | 68514477043 | RFQ | ||||||||
A | 68514477046 | RFQ | ||||||||
A | 68514477049 | RFQ | ||||||||
A | 68514477052 | RFQ | ||||||||
A | 68514477055 | RFQ |
MOL Series, Oldham Clamp Style Coupling Hubs Metric Bores
Style | Model | Torsional Stiffness | Moment of Inertia | Bore Size | Coupling Size | Length through Bore | Max. Bore | Max. Speed | Min. Bore | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 68514458109 | €78.94 | RFQ | ||||||||
A | 68514458124 | €98.70 | RFQ | ||||||||
A | 68514458613 | €78.94 | RFQ | ||||||||
A | 68514458098 | €72.37 | RFQ | ||||||||
A | 68514458123 | €98.70 | RFQ | ||||||||
A | 68514458085 | €65.81 | RFQ | ||||||||
A | 68514458122 | €98.70 | RFQ | ||||||||
A | 68514458614 | €78.94 | RFQ | ||||||||
A | 68514458980 | €98.70 | RFQ | ||||||||
B | 68514458602 | - | RFQ | ||||||||
B | 68514458084 | - | RFQ | ||||||||
B | 68514458601 | - | RFQ | ||||||||
B | 68514458606 | - | RFQ | ||||||||
B | 68514458608 | - | RFQ | ||||||||
B | 68514458607 | - | RFQ | ||||||||
B | 68514458097 | - | RFQ | ||||||||
B | 68514458108 | - | RFQ | ||||||||
B | 68514458619 | - | RFQ |
MOL Series, Oldham Set Screw Style Coupling Hubs Metric Bores
Style | Model | Item | Parallel Misalignment | Min. Bore | Bore Size | Coupling Type | Length through Bore | Max. Bore | Max. Speed | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 68514458082 | - | RFQ | ||||||||
A | 68514458081 | - | RFQ | ||||||||
A | 68514458093 | - | RFQ | ||||||||
A | 68514458092 | - | RFQ | ||||||||
A | 68514458094 | - | RFQ | ||||||||
A | 68514458104 | - | RFQ | ||||||||
A | 68514458106 | - | RFQ | ||||||||
A | 68514458604 | - | RFQ | ||||||||
B | 68514458115 | €65.81 | RFQ | ||||||||
A | 68514458105 | - | RFQ | ||||||||
A | 68514458091 | - | RFQ | ||||||||
A | 68514458114 | - | RFQ | ||||||||
A | 68514458079 | - | RFQ | ||||||||
A | 68514458103 | - | RFQ | ||||||||
A | 68514458080 | - | RFQ | ||||||||
A | 68514458118 | - | RFQ | ||||||||
A | 68514458117 | - | RFQ | ||||||||
C | 68514458116 | €65.81 | RFQ |
MOL Series, Oldham Set Screw Style Coupling Hubs Inch Bores
Style | Model | Set Screw Size | Moment of Inertia | Bore Size | Coupling Type | Length through Bore | Max. Bore | Max. Speed | Min. Bore | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 68514458078 | €43.87 | RFQ | ||||||||
A | 68514458089 | €48.26 | RFQ | ||||||||
A | 68514458102 | €52.65 | RFQ | ||||||||
A | 68514458111 | €65.81 | RFQ | ||||||||
B | 68514458076 | - | RFQ | ||||||||
B | 68514458077 | - | RFQ | ||||||||
B | 68514458090 | - | RFQ | ||||||||
B | 68514458605 | - | RFQ | ||||||||
B | 68514458088 | - | RFQ | ||||||||
B | 68514458611 | - | RFQ | ||||||||
B | 68514458100 | - | RFQ | ||||||||
B | 68514458101 | - | RFQ | ||||||||
B | 68514458612 | - | RFQ | ||||||||
B | 68514458113 | - | RFQ | ||||||||
B | 68514458112 | - | RFQ |
Controlflex Couplings
Style | Model | Item | Price | |
---|---|---|---|---|
A | CPFRG35/56-AT | €21.20 | ||
B | CPFRG23/37-AT | €17.65 | ||
C | CPFRG12/19-AT | €17.71 | ||
C | CPFRG48/75-AT | €49.61 | ||
D | CPFRG16/25-AT | €14.16 | ||
E | CPRS48-21-A | €121.68 | ||
F | CPRDK48-24-A | €158.12 | ||
G | CPRD35-14-A | €60.81 | ||
H | CPRDK35-18-A | €79.07 | ||
I | CPRSK48-20-A | €158.12 | ||
I | CPRSK48-18-A | €158.12 | ||
E | CPRS48-22-A | €121.68 | ||
J | CPRSK48-24-A | €158.12 | ||
K | CPRS48-18-A | €121.68 | ||
L | CPRS35-10-A | €60.81 | ||
M | CPRSK35-12-A | €79.07 | ||
L | CPRS35-12-A | €60.81 | ||
G | CPRD48-20-A | €121.68 | ||
N | CPRD16-5-A | €27.39 | ||
N | MCPRD25-6-A | €27.39 | ||
K | CPRS48-12-A | €121.68 | ||
O | CPRS35-18-A | €60.81 | ||
P | MCPRDK37-18-A | €46.25 | ||
G | MCPRD56-18-A | €60.81 | ||
F | MCPRDK56-25-A | €79.07 |
Explore More
- Machine Cutting Tools
- Hearing Protection
- Shipping Labels and Accessories
- Flexible Impeller Pumps
- Auto Body Tools
- Flare Nut Wrench Sets
- Colanders and Strainers
- Antistatic Gloves
- Differential Pressure Gauges
- Filter
- CHAINFLEX Data Cable, 8 Max Amps
- ELDON JAMES Polyethylene Tubing
- USA SEALING Silicone Flange Gasket, 10 Inch Outside Diameter, Red
- SPEARS VALVES Schedule 40 Flange Van Stone Style with PVC Ring, Spigot
- MARSHALLTOWN Wall Capping Tools
- WEG ODP Three Phase Foot Mount, And Foot Mount, With C Face, General Purpose Motors
- FOSTORIA Portable Heaters
- LABELMASTER GHS Tags
- NEPHROS Complete Drinking Water Filtration Systems
- CHICAGO PNEUMATIC Bearings