Lacing And Lacing Tools
Lacing is used to install a new conveyor belt or repair an existing one by joining the ends of the belt to form a loop. This process ensures that the belt stays on track and remains secure
...Read moreBolt-hinge Lacing
Lacing Tools
Conveyor Belt Lacings
Style | Model | Length | Material | Type | Price | |
---|---|---|---|---|---|---|
A | 28000305 | €81.56 | ||||
B | 28000315 | €107.66 | ||||
C | 28001495 | €536.13 | ||||
A | 28000310 | €85.08 | ||||
C | 28000368 | €291.13 | ||||
C | 28001470 | €438.90 | ||||
A | 28001410 | €120.67 | ||||
C | 28001485 | €258.63 | ||||
B | 28000320 | €125.93 | ||||
C | 28000325 | €287.57 | ||||
D | 28000369 | €568.33 | ||||
B | 28001465 | €466.63 | ||||
C | 28001500 | €1,083.99 | ||||
C | 28001490 | €519.79 | ||||
C | 28001475 | €888.02 | ||||
C | 28001467 | €704.38 | ||||
C | 28001505 | €1,588.09 | ||||
C | 28001493 | €775.60 | ||||
C | 28001480 | €1,171.64 | ||||
C | 28000370 | €749.12 |
Lacing Tool
Lacing And Lacing Tools
Conveyor belt lacing tools install conveyor belt lacing onto the conveyor belts for repairing & preventing malfunctioning. Raptor Supplies is an authorised distributor of the Apache Hose & Belting Co Inc and Flexco Inc lacing tools. Selected models feature wire hook holder strips for keeping the conveyor belt lacing in place during installation for preventing loose connections. Choose from a wide range of these conveyor & alligator belt lacing tools, available in steel, stainless steel, galvanised steel and plastic & steel constructions on Raptor Supplies.
Frequently Asked Questions
What is the difference between a hinged plate fastener and a solid plate fastener?
- Hinged plate fasteners are installed into each end of the belt and then joined together and held in place with a pin. They are typically used with small pulleys in a conveyor system.
- Solid plate fasteners, on the other hand, consist of one plate that is installed into both ends of the belt and fastened together. They are used with larger pulleys and other applications that require sift-free splice.
Is it necessary to skive a belt before installation?
Skiving is a process in which a portion of the belt's top cover is removed to simplify fastener installation. By doing so, the installed fasteners create a strong grip on the belt carcass. It also reduces the chance of the fasteners interfering with any of the belt components or conveyor structure.
How to install Alligator lacing?
- Square belt ends, then cut using the Alligator 300 Series belt cutter.
- Position clips on lacing and gently insert the gauge pin.
- Keep the bar side up and centre lacing on the belt, holding it against the gauge pin.
- Using a soft wood surface for support, hammer end teeth halfway into the top of the belt.
- Turn the belt over and hammer lacing halfway into the bottom of the belt.
- Using a hard steel plate, hammer again from the top until teeth are flush with the belt surface.
- Repeat the same process on the bottom of the belt.
- Lastly, repeat the whole process for the other end of the belt, then insert a hinge pin and notch belt to secure the lacing.
Explore More
- Pipe and Tubing
- Flashlights
- Indoor Air Quality
- Linear Motion
- Pool and Spa Pumps
- Transformer Cooling Fans
- Instrument Carts
- Magnetic Drill Press Arbors and Adaptors
- Nesting Bins
- Finned Tubular Heater Elements
- SNAP-TITE Coupler, 316 SS, 3/8-18
- RETRACTA-BELT Wall Barrier 20 Feet
- ZURN Stainless Steel Round Drain Strainer
- KETT TOOLS Yokes
- EATON JGHDC Series DC Circuit Breakers
- EATON Female BSPP Hydraulic Hose Fittings
- MILLER ELECTRIC Performance Series TIG/Multi-Task Welding Gloves
- ENERPAC GBJ Series Bottle Jacks
- ENERPAC LGH Series Pullers
- VESTIL VPLDO Series Steel Plate Dollies