Knockout Hole Punches
Knockout hole punches are designed to punch a hole through mild steel, sheet metal, aluminium, fibreglass and plastic surfaces. Raptor Supplies offers a wide range of these knockout hole
...Read moreDraw Studs, 3/4 Inch, 10 Gauge
Greenlee draw studs are ideal for punching holes in mild steel, aluminium, fibreglass or plastic workpieces. These 3/4 inch, 10 gauge studs feature a no-thread punch design to eliminate cross-threading and an innovative SPEED LOCK mechanism to quickly secure punches in place. They allow up to 3 times faster setup & disassembly, and are made of carbon steel having black oxide finish for corrosion resistance.
Greenlee draw studs are ideal for punching holes in mild steel, aluminium, fibreglass or plastic workpieces. These 3/4 inch, 10 gauge studs feature a no-thread punch design to eliminate cross-threading and an innovative SPEED LOCK mechanism to quickly secure punches in place. They allow up to 3 times faster setup & disassembly, and are made of carbon steel having black oxide finish for corrosion resistance.
Back-Out Punchs
Drawstud 10 Gauge Center Bolt
Punches, D Shaped
Greenlee D-shaped punches are used with manual wrenches or hydraulic drivers for installation of switches or instruments. They feature centring marks for hole alignment and are available in hole sizes of 0.625 x 0.594, 0.75 x 0.703, and 0.769 x 0.642 inches.
Greenlee D-shaped punches are used with manual wrenches or hydraulic drivers for installation of switches or instruments. They feature centring marks for hole alignment and are available in hole sizes of 0.625 x 0.594, 0.75 x 0.703, and 0.769 x 0.642 inches.
Knockout Punchs
Style | Model | Hole Size | Item | Price | |
---|---|---|---|---|---|
A | 745H-3-1/2 | €1,220.98 | |||
B | 745H-4 | €1,304.34 | |||
C | K2P-2-B | €136.96 | |||
D | K2P-3/4 | €67.42 | |||
E | K2P-1-B | €65.97 | |||
F | 745H-2-1/2 | €818.30 | |||
G | K2P-1-1/4-B | €88.45 | |||
H | 745H-3 | €864.69 | |||
I | K2PM-0305 | €82.27 | |||
J | 35178 | €132.30 | |||
J | 06727 | €123.95 |
Knockout Punches
Greenlee knockout punches for punching conduit size holes in fibreglass, aluminium, mild steel and plastic workpieces. These knockouts are suitable for use with hydraulic & battery powered drivers and feature carbon alloy steel construction for minimising wear over repeated usage. They are nickel plated for high abrasion resistance and selected models feature No-Thread punch design for eliminating chances of cross threading. Choose from a wide range of these knockout punches, available in 7/8, 1-7/32, 2-7/8, 3-1/2, 4-1/2 & 4 inch hole sizes.
Greenlee knockout punches for punching conduit size holes in fibreglass, aluminium, mild steel and plastic workpieces. These knockouts are suitable for use with hydraulic & battery powered drivers and feature carbon alloy steel construction for minimising wear over repeated usage. They are nickel plated for high abrasion resistance and selected models feature No-Thread punch design for eliminating chances of cross threading. Choose from a wide range of these knockout punches, available in 7/8, 1-7/32, 2-7/8, 3-1/2, 4-1/2 & 4 inch hole sizes.
Style | Model | Hole Size | Item | Use With | Price | |
---|---|---|---|---|---|---|
A | 730BB-1-1/2 | €208.74 | ||||
B | 737BB | €467.24 | ||||
C | 231 | €1,542.90 | ||||
D | 745H-2 | €954.70 | ||||
E | 7212SP-1-7/32P | €87.22 | ||||
F | 7212SP-2-1/2P | €233.77 | ||||
G | 7212SP-3P | €354.19 | ||||
H | 7212SP-1/2P | €59.48 |
Knockout Punch Exact Line
Style | Model | Hole Size | Price | |
---|---|---|---|---|
A | 49-16-2665 | €82.22 | ||
B | 49-16-2663 | €66.10 | ||
C | 49-16-2667 | €103.22 | ||
D | 49-16-2669 | €124.07 | ||
E | 49-16-2671 | €162.89 | ||
F | 49-16-2673 | €187.22 | ||
G | 49-16-2675 | €321.89 | ||
H | 49-16-2677 | €400.97 | ||
I | 49-16-2679 | €500.68 | ||
J | 49-16-2661 | €51.38 | ||
K | 49-16-2661S | €50.98 |
Knockout Dies
Greenlee knockout dies are used with punches for punching conduit size holes in fibreglass, aluminium, mild steel and plastic workpieces. These dies are suitable for use with hydraulic & battery powered drivers and feature simple, one piece design that enables quick setup & disassembly. Choose from a wide range of these knockout dies, available in 7/8, 1-7/32, 2-7/8, 3-1/2 & 4 inch hole sizes.
Greenlee knockout dies are used with punches for punching conduit size holes in fibreglass, aluminium, mild steel and plastic workpieces. These dies are suitable for use with hydraulic & battery powered drivers and feature simple, one piece design that enables quick setup & disassembly. Choose from a wide range of these knockout dies, available in 7/8, 1-7/32, 2-7/8, 3-1/2 & 4 inch hole sizes.
Style | Model | Hole Size | Use With | Price | |
---|---|---|---|---|---|
A | 7212SP-1-7/32D | €61.81 | |||
B | 7212SP-2-1/2D | €180.05 | |||
C | 7212SP-3D | €259.30 | |||
D | 7212SP-4D | €501.27 | |||
E | 7212SP-1/2D | €32.83 |
Knockout Dies
Knockout Draw Stud Exact Line
Style | Model | Price | |
---|---|---|---|
A | 49-16-2621 | €60.41 | |
B | 49-16-2682 | €59.55 | |
C | 49-16-2681 | €59.40 | |
D | 49-16-2622 | €58.33 | |
E | 49-16-2680 | €59.86 |
Punchs
Style | Model | Function | Hole Size | Price | |
---|---|---|---|---|---|
A | 7212SP-3/4P | €77.06 | |||
B | 7212SP-1P | €87.10 | |||
C | 7212SP-2P | €208.27 | |||
D | 724 | €288.29 |
Square Knockout Punchs
Round Knockout Punchs
Speed Punches, 10 Gauge
Greenlee 10 gauge speed punches are ideal for punching holes in aluminium, fibreglass, mild steel or plastic workpieces. These punches feature a no-thread punch design to prevent cross-threading and an innovative SPEED LOCK mechanism for securing punches in place. They allow up to 3 times faster setup & disassembly, and are available in hole sizes of 1-1/2 & 1-1/4 inches.
Greenlee 10 gauge speed punches are ideal for punching holes in aluminium, fibreglass, mild steel or plastic workpieces. These punches feature a no-thread punch design to prevent cross-threading and an innovative SPEED LOCK mechanism for securing punches in place. They allow up to 3 times faster setup & disassembly, and are available in hole sizes of 1-1/2 & 1-1/4 inches.
Style | Model | Hole Size | Price | |
---|---|---|---|---|
A | 7212SP-1-1/2P | €156.33 | ||
B | 7212SP-1-1/4P | €125.58 |
Knockout Punch
Knockout Punch
Knockout Die Exact Line
Style | Model | Hole Size | Price | |
---|---|---|---|---|
A | 49-16-2664 | €46.97 | ||
B | 49-16-2662 | €38.52 | ||
C | 49-16-2666 | €64.79 | ||
D | 49-16-2668 | €82.12 | ||
E | 49-16-2670 | €109.66 | ||
F | 49-16-2672 | €142.67 | ||
G | 49-16-2674 | €206.61 | ||
H | 49-16-2676 | €340.07 | ||
I | 49-16-2678 | €393.79 | ||
J | 49-16-2660 | €35.04 | ||
K | 49-16-2660S | €33.65 |
Knockout Punch and Die Kits
Knockout Die 9/32 Inch 158 Gauge
Model | Item | Price (ex. VAT) | |
---|---|---|---|
310080281 | AH8CYP | €17.23 |
Hydraulic Sleeve Adapter, Stainless Steel
Model | Item | Price (ex. VAT) | |
---|---|---|---|
1557SS | AD3MYN | €158.89 |
Knockout Hole Punches
Knockout hole punches are designed to punch a hole through mild steel, sheet metal, aluminium, fibreglass and plastic surfaces. Raptor Supplies brings to you an extensive variety of these knockout hole punches from brands like Allpax, Greenlee, Council Tool, Milwaukee, Roper Whitney, Westward, Malco and Jackson. These knockout hole punches come with centring marks to ensure hole alignment and a unique punch profile to split slugs for easy slug removal. They can be used manually, or with battery-powered, hydraulic, ratchet or manual drivers. We also offer black-out punches with a handle for driving out stubborn bolts, rivets and pins. These punches are further heat treated after machining to offer an increased depth of hardness. Choose from a wide range of these knockout hole punches available in 0 to 9 pin variants on Raptor Supplies.
Frequently Asked Questions
How to maintain knockout hole punches?
To maintain knockout hole punches, you should keep them clean and dry when not in use and periodically lubricate the moving parts to ensure smooth operation.
What factors should be considered while choosing a knockout hole punch?
When choosing a knockout hole punch, consider factors such as the size & shape of the holes you need to create and the thickness of the material you will be cutting.
Explore More
- Rope and Rope Accessories
- Lubricators
- Speed Reducers
- Fiberglass
- Lab Utensils
- Tool Pouches
- HID Fixture Reflectors
- Wire Cloth Assortments
- Wall Hydrants
- Water Quality Testing Kits
- GREENLEE Terminal Crimping Tools
- TURNSTILE Hi Gate Locking Exit One Way
- TEXAS PNEUMATIC TOOLS Throttle Valve Stem
- DIXON Close Pipe Nipples
- ALVORD POLK 407 Series Capscrew Counterbore Reamer
- Champion Tool Storage Modular Series Cabinets
- BROWNING Steel Sprockets With Q-D Bushings For No. 35 Chain
- DATA LOGIC Sentinel Series Mounting Brackets
- LISTA Liners