HARTELL Ice Machine Pumps

Fit commercial ice-making equipment to supply water & provide a continuous supply of ice. Can also reuse the discharged condensate from the ice-making equipment.

Filter

HARTELL -

GPP Series Ice Machine Pumps

StyleModelVoltageOutside Dia.FrequencyPrice
AGPP-4S-1115V3/4"60 Hz€165.02
RFQ
BGPP-3MA-1115V1"60 Hz€362.02
RFQ
CGPP-3MH-1P115V5/8"60 Hz€137.44
RFQ
DGPP-3S-1115V1/2"60 Hz€184.97
RFQ
EGPP-3S-1B115V3/4"60 Hz€182.09
RFQ
FGPP-3M-1S115V3/4"60 Hz€196.45
RFQ
GGPP-1MH-1P115V5/8"50/60 Hz€139.96
RFQ
HGPP-5MA-1115V1/2"60 Hz€215.65
RFQ
IGPP-4MA-1115V1/2"60 Hz€185.18
RFQ
JGPP-5MA-2A230V1/2"50/60 Hz€223.75
RFQ
KGPP-3RC-4230V5/8"50/60 Hz€156.49
RFQ
LGPP-8MA-2A230V1"50/60 Hz€172.47
RFQ
MGPP-9M-4230V1"50/60 Hz€210.76
RFQ
NGPP-4MH-2P230V5/8"50/60 Hz€119.78
RFQ
OGPP-3MH-2P230V5/8"50/60 Hz€144.82
RFQ
PGPP-15Y-2230V1"50/60 Hz€230.73
RFQ
QGPP-3S-2230V1/2"50/60 Hz€161.43
RFQ
RGPP-4S-2230V3/4"50/60 Hz€141.46
RFQ
BGPP-3MA-2230V1"50/60 Hz€369.43
RFQ
PGPP-6L-2B230V5/8"50/60 Hz€180.96
RFQ
GGPP-1MH-2P230V5/8"50/60 Hz€113.13
RFQ

Frequently Asked Questions

How to install Hartell ice machine pumps?

  • Position and hold the motor with the shaft facing up.
  • Place one washer over each motor stud.
  • Slide the slinger down the motor shaft to about 1/2-inch from the motor.
  • Place bracket (if used) over motor studs.
  • Place the housing over motor studs and note the orientation of discharge.
  • Place one washer over each motor stud.
  • Screw the thumb nuts onto the motor studs. Do not tighten.
  • Center the motor shaft in the housing centre hole and tighten the thumb nuts.
  • Slide the impeller onto the motor shaft.
  • Push and hold down the impeller. Screw the impeller nut into the motor shaft until it touches the impeller.