GAST Air Motors Gast air motors are ideal for various hand-held tools, such as sanders, drills, grinders and nut runners. They offer no-load speeds up to 3000 rpm and are available in shaft diameters ranging between 3/8 and 1 inches.
Gast air motors are ideal for various hand-held tools, such as sanders, drills, grinders and nut runners. They offer no-load speeds up to 3000 rpm and are available in shaft diameters ranging between 3/8 and 1 inches.
GAST -
Air / Gear Motors
Style | Model | Item | Max. Torque | Length | CFM | Height | Housing Material | HP | Keyway | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 4AM-RV-127-GR20 | €1,468.95 | |||||||||
B | 2AM-NRV-251 | €433.07 | |||||||||
C | 1UP-NRV-10 | €508.17 | |||||||||
D | 4AM-NRV-50C | €606.78 | |||||||||
E | 1AM-NRV-56 | €467.26 | |||||||||
E | 1AM-NRV-63A | €463.56 | |||||||||
F | 1UP-NRV-4 | €501.53 | |||||||||
E | 2AM-NRV-89 | €538.47 | |||||||||
G | 4AM-NRV-130 | €488.38 | |||||||||
E | 4AM-RV-75 | €1,042.26 | |||||||||
E | 8AM-NRV-5B | €1,165.58 | |||||||||
E | 6AM-NRV-29A | €1,001.88 | |||||||||
H | 2AM-FCC-1 | €424.83 | |||||||||
B | 6AM-NRV-251 | €735.09 | |||||||||
E | 2AM-FCW-13 | €449.41 | |||||||||
I | 1AM-NRV-60-GR11 | €1,053.71 | |||||||||
J | 1UP-NRV-11-GR11 | €1,075.36 | |||||||||
E | 2AM-NCC-43A | €611.11 | |||||||||
E | 2AM-NCW-7A | €402.07 | |||||||||
K | 4AM-NRV-22B | €519.03 | |||||||||
E | 1AM-NRV-39A | €372.15 | |||||||||
L | 1UP-NRV-3A | €386.27 | |||||||||
M | 2AM-NCC-16 | €397.62 | |||||||||
E | 1AM-NCC-12 | €363.80 | |||||||||
N | 4AM-RV-75-GR20 | €2,068.62 |
GAST -
Air Gearmotor
Model | Item | Price (ex. VAT) | |
---|---|---|---|
1UP-GR11 Series | AE2QWG | €700.19 |
GAST -
Stock 12/Skid 16Am-Frv-13 Air Motor
Model | Item | Price (ex. VAT) | |
---|---|---|---|
16AM-FRV-13 | CP6HQG | €2,773.82 |
GAST -
Air Motor
Model | Item | Price (ex. VAT) | |
---|---|---|---|
NL32-NCW-6 | CP6HJD | €1,089.07 |
Frequently Asked Questions
What size air line is recommended for Gast air motors?
It is recommended that the size of the air line should be one size larger or the same size as the port.
How often should the air filter be checked for Gast rotary vane motors?
It is recommended that the filters should be cleaned, inspected and / or replaced after 500 hours of operation.
Can Gast air motors be mounted in any position?
They offer a C-face, foot or hub mounting design that allows the user to install it in these positions, depending upon the application requirement, for enhanced stability.
What type of oil should be used for lubricating Gast air motors?
A 10 wt detergent oil is suitable to lubricate Gast air motors. However, a 10w30 detergent oil can also be used as a substitute.
Explore More
- Washers
- Door Hardware
- Automotive Towing
- Wire Management
- Aluminum
- Solid Joint Pliers
- Combination Wrench Sets
- Safety Monitoring Relays
- Hydraulic Accumulator Mounts
- Wire Connector Kits
- WESTWARD Standard SAE Ratcheting Combination Wrench
- WALTER TOOLS 3/8" Inscribed Circle, CCGT, 80 Degrees Diamond, Carbide Turning Insert
- CHANNELLOCK Linemans Pliers
- APPROVED VENDOR Hydraulic In-line Filter
- DAYTON Line Volt Mechanical Tstats
- SHUR-LINE Mini and Trim Roller Trays
- SPEARS VALVES PVC Butterfly Check Valves, Wafer, EPDM
- APPROVED VENDOR Single Cut Cone Burs
- REZNOR Boards
- ROBOT COUPE Plates