Item | Micro Drill Bit |
Circuit Board Drill | No |
Coolant Fed | Non Coolant Through |
Cutting Direction | Left Hand |
Decimal Equivalent | 0.0071 |
Depth X Dia. Ratio | 5xd |
Drill Bit Point Angle | 118° |
Drill Bit Point Type | Facet |
Drill Bit Size | #94 |
Drill Diameter Tolerance | -0.004 mm to 0 mm |
Finish | Bright, Uncoated |
Flute Length | 0.031" |
Flute Type | Spiral |
Grade | High Performance |
Material | High Speed Steel |
Max. Drilling Depth | 0.043" |
Number Of Flutes | 2 |
Overall Length | 25 mm |
Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Steel, Titanium |
Secondary Material Application | Composite, Stainless Steel |
Shank Dia. | 1 mm |
Shank Length | 23.9 mm |
Shank Type | Straight |
Depth:dia. Ratio | 5xD |
Finish - Machining | Bright (Uncoated) |
Material - Machining | High Speed Steel |
Material Grade - Machining | High Performance |
Maximum Drilling Depth | 0.043" |
Measurement System | Wire |
Primary Material Application Iso Code | K, N, P, S |
Secondary Material Application Iso Code | M, O |
Shank Type - Machining | Straight |
Standards | DIN 1899 |