info@raptorsupplies.com

GOULDS WATER TECHNOLOGY WS D4 3888 Series, Submersible Sewage Pump


Goulds Water Technology 3888 Series submersible sewage pumps are used to remove sewage from a variety of locations like basements, sump pits and septic tanks. These pumps are installed below the water line and are designed to handle the corrosive and abrasive nature of sewage.

Filter
GOULDS WATER TECHNOLOGY WS3034D4A
GOULDS WATER TECHNOLOGY WS3032D4B
Base Material: Cast Iron , Bearing Type: Ball , Cord Length: 20ft. , Diameter: 15.75" , GPM of Water @ 10 Ft. of Head: 390 , GPM of Water @ 50 Ft. of Head: 155 , Height: 28.25" , Housing: Cast Iron , Housing Material: Cast iron , Impeller Material: Cast Iron , Max. Dia. Solids: 3" , Motor RPM: 1750 , Pump Type: Manual , RPM: 1750 , Shaft Material: Stainless Steel , Shaft Seal: Silicon Carbide , Switch Type: None , Top Material: Cast Iron
StyleModelThermal ProtectionMax. HeadAmpsGPM of Water @ 20 Ft. of HeadGPM of Water @ 25 Ft. of HeadGPM of Water @ 30 Ft. of HeadGPM of Water @ 40 Ft. of HeadHPPrice
A
WS3034D4		No46 ft.7.2440370225753€6,772.43
B
WS3032D4		No46 ft.14.4440370225753€6,772.43
A
WS5034D4		No52 ft.8.35254503701755€7,511.36
A
WS2034D4		No35 ft.5.8300200100-2€6,011.18
A
WS7534D4		No60 ft.11.56204903301507.5€8,950.13
A
WS5032D4		No52 ft.16.65254503701755€7,023.75
A
WS1538D4		No38 ft.11.5225125--1.5€5,790.79
A
WS2038D4		No44 ft.13.3300200100-2€6,124.31
A
WS3038D4		No54 ft.16.6440370225753€6,824.86
A
WS1532D4		No30 ft.10225125--1.5€5,695.67
A
WS1534D4		No30 ft.5225125--1.5€5,717.84
A
WS7532D4		No60 ft.236204903301507.5€9,021.48
A
WS5038D4		No64 ft.19.15254503701755€7,154.15
A
WS2032D4		No35 ft.11.6300200100-2€6,031.29
A
WS2012D4		Yes35 ft.16.3300200100-2€6,256.83
A
WS5012D4		Yes52 ft.26.55254503701755€8,112.90
A
WS3012D4		Yes46 ft.21.5440370225753€7,542.01
A
WS1512D4		Yes30 ft.13.2225125--1.5€5,503.65

Working Mechanism

  • The pump is installed below the water line in the sewage containing area.
  • The pump is powered by an electric motor.
  • The motor turns a shaft that is connected to an impeller.
  • The impeller rotates and creates a centrifugal force that pushes the sewage into the pump.
  • The sewage is then pumped out of the pump through a discharge pipe.

Features

  • Goulds Water Technology 3888 Series submersible sewage pumps are equipped with ball bearings for reduced friction and improved performance.
  • They are made of cast iron for strength & durability and corrosion resistance.
  • These submersible sewage pumps have 3 phase / capacitor start motor for improved efficiency and reduced heating.
  • They come with silicone carbide shaft seals for reduced leakage.

Standards and Approvals

  • CSA
  • UL

Frequently Asked Questions

What safety precautions should be followed when working with submersible sewage pumps?

  • Make sure the pump is properly grounded before operating it.
  • Never operate the pump without the proper safety guards.
  • Avoid contact with sewage, chemicals and electrical components to prevent shock or any other potential hazards when working with submersible sewage pumps.
  • Disconnect and lockout / tagout the power supply before working on the pump.

How do I maintain these submersible sewage pumps?

  • Check the pump regularly for leaks.
  • Clean the pump regularly to remove debris.
  • Lubricate the pump regularly to prevent wear.
  • Replace the pump filter regularly to prevent clogging.

What is the speed range of these?

1750 RPM.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More