EATON Control Wire Terminal Kits
Eaton control wire terminal kits are used as accessories to connect wires to Eaton moulded case circuit breakers. These kits consist of a pack of 12 control wire terminals and 12 screws. The F-frame control wire terminals must only be used with steel collars for a reliable connection.
Filter
Frequently Asked Questions
How to assemble the control wire terminal in the circuit breaker?
- Remove 5/16 inch long collar mounting screw.
- Insert terminal between the bottom of the conductor and collar.
- Insert 3/8 inch long replacement screw through the collar, terminal and conductor.
- Now, tighten the screw into the nut, creating a secure connection.
- Do not remove the control wire terminal without reinstalling the screw as this might cause the cable to loosen up and overheat.
What is a moulded case circuit breaker?
A moulded case circuit breaker (MCCB) is a type of electrical protection device that protects the circuit from damage due to overloading or short circuits. It features a thermal or magnetic trip mechanism that detects the fault condition and activates the breaker to open the contacts, thereby interrupting the flow.
We are here to help!
Looking for a part not listed here?
Explore More
- Torque Screwdrivers
- Air Nailers
- Grille and Shutter Accessories
- Aquatic Weed Control Rakes
- Belt Tensioners and Tension Pulleys
- Pressure and Temperature Control Valves
- Stretch Wrap and Stretch Wrap Equipment
- Paint Sprayers and Accessories
- Programmable Logic Controllers (PLC)
- Paint Booths and Accessories
- SQUARE D Close On Rise Liquid 2-Level Switch
- MONOPRICE Flat HDMI Cables
- DIXON Tapes
- THOMAS & BETTS RB657 Series Fork Terminals
- THOMAS & BETTS M2DBOOT Series Plug and Connector Boots
- WATTS Pressure Control Valves
- WESTWARD Drift Punch Sets
- SCHNEIDER ELECTRIC Contact Blocks
- HUB CITY Flanged Mounted Bearings, 2-Bolt Flange
- CONDOR 3 Piece Rainsuit With Detachable Hood, PVC, 4 mil Thick, Yellow