info@raptorsupplies.com

DAYTON Blower 9-1/2 Inch 115 V


Filter
DAYTON 7HL52A
Assembled/Unassembled: Unassembled , Bearing Type: Sleeve , CFM @ 0.500-In. SP: # # 1575 1480 , CFM @ 1.250-In. SP: # 1570 1400 1200 , CFM @ 1.500-In. SP: 705 - - - , Drive Type: Direct , Footnotes: # Motor Overload Condition , Housing Finish: None , Housing Material: Galvanized Steel , Hz: 60 , Max. Ambient Temp.: 104 F , Max. Inlet Temp.: 104 Deg.F , Motor Enclosure: Open Air-Over , Mounting: Multipostion , Phase: 1 , Speed: 4 , Speed Controllable: No , Voltage: 115 , Wheel Material: Steel
StyleModelWheel DiameterHousing HeightBlower RPMCFM RangeDischarge Height (In.)Discharge Width (In.)Full Load AmpsHousing DepthPrice
A
7HL52		9 1/2"15 9/16"1050750 to 560 @ 0.6-In SP to 1.0-In SP10.259.1876.514-15/16"€523.03
A
7HL58		9 1/2"15 9/16"10751575 to 1075 @ 0.5-In SP to 1.0-In SP10.2511.8758.714-15/16"€541.50
A
7HL54		9 1/2"15 9/16"10751230 to 895 @ 0.6-In SP to 1.2-In SP10.259.1876.314-15/16"€516.11
A
7HL57		9 1/2"15 9/16"10751395 to 875 @ 0.6-In SP to 1.1-In SP10.2511.8756.314-15/16"€515.62
A
7HL53		9 1/2"15 9/16"1075845 to 990 @ 0.7-In SP to 1.2-In SP10.259.1874.014-15/16"€561.57
A
7HL56		9 1/2"15 9/16"1075845 to 350 @ 0.6-In SP to 1.1-In SP10.2511.8754.014-15/16"€561.07
A
7HL59		10 13/16"17.5"1075845 to 705 @ 0.8-In SP to 1.5-In SP11.37510.512.016-1/2"€610.37
A
7HL62		10 13/16"17.5"1075955 to 710 @ 0.7-In SP to 1.3-In SP11.37513-1/164.016-1/2"€601.01
A
7HL63		10 13/16"17.5"10751350 to 905 @ 0.8-In SP to 1.25-In SP11.37513-1/168.716-1/2"€555.56
A
7HL64		10 13/16"17.5"10752020 to 1555 @ 0.7-In SP to 1.25-In SP11.37513-1/168.716-1/2"€581.44
A
7HL61		10 13/16"17.5"10751705 to 1460 @ 0.9-In SP to 1.5-In SP11.37510.58.716-1/2"€590.80
A
7HL60		10 13/16"17.5"10751375 to 700 @ 1.0-In SP to 1.5-In SP11.37510.56.316-1/2"€564.91

Blower 9-1/2 Inch 115 V

Dayton centrifugal blowers are positioned inside the ductwork to provide clean air circulation via intake, exhaust, ventilation or makeup air systems in industrial & commercial applications. These galvanised steel units are equipped with forward curved wheels, producing high-efficiency air volume with low rotational speeds for a quiet operation. They include housing support with resilient pads to reduce vibration and adjustable mounting bracket & hardware for installation convenience. Choose from an extensive range of these double inlet forward curve blowers, available in 1050 and 1075 rpm motor speeds.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More